Easy Care Guidelines for Vinyl Floors

    

vinyl-3Our customers confirm that their vinyl floors really are easy to maintain, are durable and beautiful.  

The ease of maintenance is often cited as a primary reason vinyl is chosen for a particular area inside a home. It provides some peace of mind for homeowners with pets, active children and where there is high traffic inside the home. 

With that in mind, basic cleaning is still needed, and clean up after accidents will still need to happen in order to keep your floors looking newer for as long as possible.

To keep the shine and new feeling of your investment for as long as possible, follow the guidelines below.


DO

  • Wipe up spills as soon as possible. Remove dried spills with an approved vinyl floor cleaning product.
  • Wash your floor occasionally with Armstrong™ Once ‘n Done® Resilient & Ceramic Floor Cleaner.
  • Use Armstrong Shinekeeper® Floor Finish or Armstrong Satinkeeper® Low Gloss Floor Finish to return your floor's original shine if it begins to dull over time.

DON'T

  • Use detergents, abrasive cleaners or "mop and shine" products - they may leave a dull film on your floor.
  • Use paste wax or solvent-based polishes.
  • Use a beater bar when vacuuming because it can visibly damage the floor surface.
  • Use highly abrasive scrubbing tools.
  • If you use grout with your Alterna™ floor, don’t use Armstrong New Beginning Extra-Strength Floor Stripper or other floor strippers to clean the grout or to clean your floor. Floor strippers will degrade the acrylic grout.

Immediately After Installation

  • Maintain room temperature at 65 degrees Fahrenheit for 48 hours after installation is completed.  This assures proper curing, setting and bonding of products.
  • The adhesive under your floor needs time to thoroughly dry after installation.  Therefore we recommend that you do not scrub or wash your floor for five days.
  • For vinyl sheet, allow the seams to seal for 8 hours after seam application.  This will ensure the proper seam bond and a seamless finish.  If seams are disturbed before they’re dry, permanent damage may result.
  • For vinyl tile, use a damp sponge, cloth, or mop to wipe off the logo printed on the face of the floor.  Be careful not to wipe across any seams.

Proactive Protection 

  • When moving appliances or heavy furniture, lay a plywood panel on your floor and "walk" the item across it.  This protects your floor from scuffing and tears.
  • Use Armstrong Floor Protectors on furniture to reduce indentation.  As a general rule of thumb, the heavier the item, the wider the floor protector needed.
  • Be careful with rolling casters, they can damage the floor.  We do not recommend their use on vinyl floors!  If you choose to use them, the double wheel type are the best option.
  • Place a walk-off mat at outside entrances to reduce the amount of dirt brought into your home. We do not recommend the use of rubber or latex backed mats because the chemical (antioxidant) used to keep the backing from becoming brittle can permanently stain your floor.  We suggest a nonstaining vinyl-backed mat or a woven rug that is colorfast.  Most of these products are identified "colorfast" by the manufacturer.

schedule_appt


   
 

We Bring Carpeting and Flooring to You
Call Today: 816-741-0157

Serving Parkville, Kansas City North, Lake Waukomis, Kansas City, Platte City, St. Joseph
Johnson County, Jackson County, Clay County and 
all of Greater Kansas City in Missouri and Kansas.


Copyright Flooring Direct of KC. 239 NW North Shore Dr., Kansas City, MO 64151

  Site Map